Good maintenance in a care home comes down to four things: know which assets you have and in what state, make it effortless for staff to report problems, plan recurring work and inspections instead of reacting, and keep the proof that everything was done. Then you can show anyone where each building stands.
This guide walks through each step, with examples from Belgian care groups that made the switch.
Why is maintenance in a care home different?
A care home is someone's home, a workplace and a regulated care facility at the same time. That changes three things.
The people who notice problems are not technicians. Care staff, residents and families see the broken call button or the leaking tap first. Every minute they spend reporting it is a minute away from care.
Some failures are a safety issue, not an inconvenience. A lift, a fire door, a nurse call system or the hot water installation cannot wait until next week. Residents often cannot evacuate themselves, so fire safety rules are strict.
The building is under financial pressure. Many Belgian operators lease their buildings under triple net contracts, which means the operator pays for all maintenance and repairs. In our podcast, Armonea CEO Yves Remy describes how rising rents squeeze the budget, and how maintenance is often the first thing to be postponed. Deferred maintenance never gets cheaper.
What should you register? Start with an asset list
You cannot plan what you cannot see. The first step is a simple register of the assets that matter, per building and per floor or wing:
| Category | Examples | Why it matters |
|---|---|---|
| Safety installations | Fire detection, fire doors, emergency lighting, extinguishers | Inspections are mandatory and resident safety depends on them |
| Care-critical equipment | Nurse call system, lifts, hoists, care beds | Failure directly affects residents |
| Technical installations | Heating, ventilation, hot water, electrical installation | High cost of failure, recurring maintenance |
| Building and rooms | Doors, windows, bathrooms, furniture | Most of the daily reports land here |
For each asset, keep the basics: location, installation date, supplier, maintenance contract, manuals and the latest inspection report. You do not need everything on day one. Start with safety and care-critical equipment, and grow the list as reports come in.
How should staff report issues?
The best reporting system is the one people actually use. In most care homes, issues still arrive by phone, email, a note at reception or a remark in the hallway. Things get lost, and technicians are interrupted all day.
Dijleland, a group of four care homes near Leuven, replaced post-its with QR codes. Staff scan the code with their phone, add a photo or video and send it. No app, no login. The group now receives around 70 reports a week, all in one place. Their technician Stefan explains that a short video often shows him the problem before he walks over, so he brings the right part the first time.
Three principles make reporting work:
- No barriers. No account, no form with ten fields. The location comes from the QR code.
- A photo instead of a description. Care staff do not need technical vocabulary. A photo also helps the technician: at Dijleland, a colleague still learning Dutch no longer has to decipher handwritten notes.
- Feedback. People keep reporting when they see issues get fixed.
Which maintenance should you plan?
Reactive repairs never stop, but the expensive surprises come from what was not planned. A preventive plan in a care home covers at least:
- Legal inspections and checks of fire safety installations, lifts, the electrical installation and heating, on the frequency set by regulation and your insurer.
- Hot water management. In Flanders, care homes count as high-risk facilities under the Legionella Decree of 2007: they need a risk analysis, a legionella management plan for the water supply, and a register of the checks and samples taken.
- Manufacturer maintenance for care equipment such as hoists and care beds.
- Seasonal work: gutters and roofs before winter, cooling before summer. Non-urgent jobs like painting can be grouped for quieter periods.
Put each task in a schedule with a responsible person and an automatic reminder. When a group has several buildings, the same plan per building makes it easy to compare sites. At Armonea, with more than 80 care centres, recurring tasks are visible next to repairs, so nothing is missed.
How do you prove compliance?
When an inspector, insurer or owner asks for proof, you need to show what was checked, when, by whom, and what was done with the findings. That is hard when reports live in binders and mailboxes.
Keep every inspection report and certificate with the asset it belongs to, and turn findings into tasks right away. The FixForm Compliance Agent reads an uploaded inspection report, extracts the findings, suggests the tasks and registers the assets. Processing a report goes from about 90 minutes to about 15. The point is not the report itself: the findings become work in the same place your team already works.
How do you budget for the building?
Maintenance history is the best basis for a budget. When every repair and inspection is logged per asset, you can see which installations keep failing, what they cost and when replacement makes more sense than another repair.
That matters more as the sector faces large investments, such as the energy standards towards 2034 that Yves Remy calls a capex wall. With the data per building, you can plan those investments over several years instead of being surprised by them, and make your case to the owner, the board or the bank. The FixForm Budget Agent builds that multi-year view from your asset data.
Where do you start?
- Pick one building and place QR codes in the rooms and common areas.
- Register safety and care-critical assets with their latest inspection reports.
- Put legal inspections in a schedule with reminders.
- Review after a month: how many reports, how fast were they closed, what keeps coming back?
- Roll out to the next building with the same structure.
Dijleland had a full communication plan ready for the launch, and did not need it: staff picked it up right away.
Frequently asked questions
What is asset management in a care home? It is knowing which equipment and installations you have, where they are, what state they are in and what maintenance they need, so you can plan work and budgets instead of reacting to breakdowns.
Who should report maintenance issues in a care home? Anyone who notices them: care staff, residents, families and visitors. The easier reporting is, the earlier small problems are fixed before they become big ones.
How do you keep track of inspections across several care homes? Use one schedule per building with the same structure, link every inspection report to the asset it covers, and turn findings into tasks with a deadline. A central overview then shows which sites are up to date.
Does maintenance software replace our existing facility management system? Not necessarily. Maria Middelares hospital in Ghent uses FixForm as the easy reporting layer and sends QR reports straight into TOPdesk.
Is this only for large care groups? No. A single care home has the same problems on a smaller scale: reports by phone, binders full of certificates and a technician who is interrupted all day. See how care organisations use FixForm.
Written by Kobe, Customer Success at FixForm, with AI assistance, based on our published customer stories, our podcast and public sources. Cover photo: colsan ltda on Unsplash.